$339.00
The X2 is now part of the Foundation Series of embedded I/O controllers. All units feature a built-in logic engine, operator interface, networking and I/O. Use the dropdown below to select from our two distinct models: X2R (relay outputs) and X2A (digital outputs)
Current lead time is 2-6 weeks.
MINIMAL PHYSICAL DESIGN
The small, sleek profile of the X2 enables you to fit more in your panel, saving space and resources. For an introductory product, it packs a big picture into an overall small package. With just a 4.6” x 3.5” cutout, its overall design is powerful, reliable, and durable.
COMPREHENSIVE I/O CONFIGURATION
In an effort to make implementing Horner OCS controllers as seamless and user-friendly as possible, we have selected a streamlined set of on-board I/O. The wide scope of digital and analog I/O make automating your applications, and your organization, as simple as the push of a button. If the built-in I/O of the X2 isn’t enough for your specific application, you can easily expand via CAN or serial.
FLEXIBILITY
In the market of fixed I/O, stand-alone controllers, the X2 is unmatched. Suited for most applications across a diverse range of industries, this controller exceeds standards (and expectations). The intuitive user interface, rugged durability, and suite of capabilities within the controller are similar to our more established XL line of products.
COMPETITIVE ADVANTAGE
With the addition of the X2 OCS controller, our engineers at Horner Automation have designed a slim, versatile, and complimentary product to our existing line of robust industrial solutions. The X2, when utilized as an introductory piece, empowers your organization to grow by seamlessly incorporating additional Horner solutions (such as our more advanced X4 or premium X5 OCS controllers) to your expanding system.
| Built-In Inputs/Outputs | HE-X2A (Model A) | HE-X2R (Model R) |
|---|---|---|
| DC In | 12 | 12 |
| DC Out | 12 | 2 |
| Relays | n/a | 6 |
| HS In | 4 | 4 |
| HS Out | 2 | 2 |
| mA In | 4 | 4 |
| mA Out | 2 | 2 |
| Note: There are four high-speed inputs of the total DC Inputs. There are two high-speed outputs of the total DC outputs. | ||
| Note: Model A supports sourcing outputs. Model R DC outputs are sinking with integral pull up resistors. | ||
| CONTROLLER | |
| Ladder Logic Memory | 256 kB |
| Logic Scan Rate | 1.2 mS/K |
| Removable Memory | microSD |
| Local Comment Storage | Yes |
| Floating Point Support | Yes (32-bit) |
| AutoTune PID Capable | Yes (4 loops) |
| OPERATOR INTERFACE INTERFACE | |
| Characters / Pixels | 128 x 64 |
| Display Technology | 2.2" Monochrome LCD |
| Character Height | Selectable Fonts |
| Number of Pages | 250 |
| Fields or Objects per Page | 15 |
| Total Keys | 20 |
| Function Keys | 10 |
| OEM Faceplate Available | No |
| I/O | |
| Built-in I/O Points | 26 (Model R); 30 (Model A) |
| SmartStix, SmartRail, SmartBlock I/O Support | yes, CsCAN |
| Digital Inputs / Outputs, max | 1024 / 1024 |
| Analog Inputs / Outputs, max | 512 / 512 |
| General Purpose Registers (words) | 5000 r |
| General Purpose Internal Coils (bits) | 2,048 (1,024 retentive) |
| SERIAL COMMUNICATIONS | |
| Total Active Ports | 2 |
| RS-232 Ports / RS-485 Ports | RS-232 / RS-485 (1 of each) |
| PLC / Drive Protocols | Yes |
| RTU / Modbus Master / Slave | Yes |
| Serial ASCII In / Out | Yes |
| USB Ports (A and Mini-B) | Mini-B only for programming |
| ETHERNET/INTERNET | |
| LAN Ports | 0 |
| Factory Protocols | n/a |
| IIoT & Remote Access | n/a |
| Other Protocols | n/a |
| NETWORKING | |
| Integrated CAN Networks | Standard |
| Supported CAN Networks | CsCAN |
| Maximum CAN Distance | 1,640 ft. |
| Programming over CAN | Yes |
| PHYSICAL SPECIFICATIONS | |
| Height | 4.69″ / 119.18 mm |
| Width | 3.53″ / 89.76 mm |
| Total Depth | 1.29″ / 32.7 mm |
| OPERATING SPECIFICATIONS & STANDARDS | |
| Operating Temperature | -10 to 60°C |
| Humidity (non-condensing) | 5 to 95% |
| Voltage | 24 +/-20% VDC |
| Product Certifications | CE, C’ |
| Environmental Rating | UL 50E Type 1, 4x (indoor use only), 12, 12k, 13 |
| Document | Reference Number | Link to Download | |
|---|---|---|---|
| SALES LITERATURE | |||
| OCS Comparison Guide | HA-294 |  | |
| Starter Kit Sales Sheet | HA-345 | | |
| DRAWINGS | Electrical (DWG) | 2D Mechanical (DWG / PDF) | 3D Mechanical (STP / IGS) |
| HE-X2A / HE-X2R | | | |
| TECHNICAL DOCUMENTATION | |||
| X2 User Manual | MAN1130 | Download | |
| X2 Datasheet | MAN1131 | Download | |
| X2 Quick Reference Guide | MAN1132 | Download | |
| SUPPLEMENTAL | |||
| App Guide for Updating Firmware | MAN1011 | | |
| Cutout Template Sheet | SUP1551 | |
| Certification Type | Download Certificate |
|---|---|
| UL | |
| CE Declaration of Conformity | |
| ISO 9001: 2015 | |
| Lithium Battery Test Summary | |
| PRODUCT | VERSION | RELEASE DATE | TYPE | DETAILS | REQUIREMENTS | |
|---|---|---|---|---|---|---|
| X2 | CSCAN 15.62 | August 2023 | Enhancement | Added OCS-I/O support for all models. NOTE: CNX100 requires Cscape 9.90 SP10 onwards | Bootloader | |
| X2 | CSCAN 15.62 | August 2023 | Bug Fix | Resolved issue wherein timer output was turning on at startup (7639) | Bootloader | |
| X2 | CSCAN 15.62 | August 2023 | Bug Fix | Resolved issue wherein after power cycle the first pulse output duration was either missed or way too short (7634) | Bootloader | |
| X2 | CSCAN 15.62 | August 2023 | Bug Fix | Resolved issue wherein alarm history list was not getting retained after power cycle (5817) NOTE: Applicable to X2 only. | Bootloader | |
| X2 | CSCAN 15.62 | August 2023 | Bug Fix | Resolved issue wherein filename counter was not working properly if a file with screen capture is downloaded previously (5717) | Bootloader | |
| X2 | Download Firmware 15.62 Release Notes | |||||
| X2 | CSCAN 15.60 | February 2023 | Bug Fix | Resolved issue when Full Duplex communication was not working properly with multiple slaves connected. (7587) | Bootloader | |
| X2 | CSCAN 15.60 | February 2023 | Bug Fix | Applicable to XLEe / XLTe only Resolved issue when WebMI license details on System Menu were not retained if ethernet cable or microSD card was removed. (9554/1258) | Bootloader | |
