XL10W Prime

Name: XL10W Prime | Reliable Controls
Availability: InStock

Price range: $3,449.00 through $4,096.00

1 in stock (can be backordered)

All XL10W prime units feature a built-in logic engine, operator interface, networking and I/O.

Please select the model number from the dropdown to see current stock and pricing.

Current lead time is 2 – 6 weeks.

10″ PLC/HMI Comparison Sheet

This controller is BABAA Compliant

Model Number

Clear selection

SKU: N/A Categories: Complete System Solutions, All-in-One Controllers, XL Prime All-in-One PLC/HMI

Description

XL10W Prime

The XL10W Prime Logic engine features 2MB of application memory with a 0.02mS/K logic scan. Online Programming Mode (making logic changes on the fly without going thru stop mode) is supported.

Operator Interface features include:

10.1” WSVGA (1024×600) display, virtual function keys
6 I/O configurations for up to 42 I/O points onboard
USB 2.0 On-the-Go port (mini-B 5pin) is available for programming
USB 2.0 Host port (A) is available for exchanging files with USB FLASH drives
Two (2) RS-232/485 ports support RTU/Modbus Master/Slave, ASCII In/Out, and PLC/Drive downloadable protocols

Networking features include:

(2) built-in 10/100 Ethernet port
(2) integrated CAN ports that support CsCAN and either CANopen, J1939, or DeviceNet Scanner simultaneously

All units feature a microSD slot, supporting at least 32GB.

Model Lineup

CONTROLLER MODEL	CONFIGURATION
HE-X10PE0	No built-in I/O
HE-X10PE2	12 DC in, 6 Relay Out, 4 – 12-bit Analog In
HE-X10PE3	12 DC in, 12 DC Out, 2 – 12-bit Analog In
HE-X10PE4	24 DC in, 16 DC Out, 2 – 12-bit Analog In
HE-X10PE5	12 DC in, 12 DC Out, 2 – 14/16-bit Analog In (mA/V/Tc/mV/RTD), 2 – 12-bit Analog Out
HE-X10PE6	12 DC in, 12 DC Out, 6 – 14/17-bit Analog In (mA/V/Tc/mV/RTD), 4 – 12-bit Analog Out
*Up To six mA/V In, mA/V RTD/Tc, and mA/V Out

*SPECIAL ORDER ()**
Part Number Extension
-10	Thermistor option. Add -10 to the part number for Thermistor support for Analog Inputs 1 & 2. Model 2, 3, 4 only.
-14	Thermistor option. Add -14 to the part number for (4) Channel Thermistor support. Model 2 option only
-441	WebMI License Unlimited pre-loaded
-442	Enhanced IEC License pre-loaded
-445	MQTT License pre-loaded
-602	Screw type I/O terminals. Replaces spring type terminals. Model 6 only
(*) Not available for purchase on the web store. Please call factory for product availability. Lead time on special order products is 4-6 weeks.
For combinations of adder options, please contact the factory – 877.665.5666

Specifications

CONTROLLER
Ladder Logic Memory	2 MB
Logic Scan Rate	0.02 mS/K
Removable Memory	microSD
Local Comment Storage	Yes
Floating Point Support	Yes
AutoTune PID Capable	Yes

OPERATOR INTERFACE
Display Technology	10.1” LED Color
Resolution/Color	1024X600 (300 cd/m² nits typical)
Touch Screen	Resistive with Laminated Cover
Character Height	Selectable fonts
User-Programmable Screens/Pages	1023
Fields or Objects per Page	1023
Total Keys	8 (on screen)
Function Keys	7 (on screen)

I/O
Built-in I/O Points	22-44
SmartStix, SmartRail, SmartBlock I/O Support	Yes, CsCAN and Ethernet
Digital Inputs / Outputs, max	2048 / 2048
Analog Inputs / Outputs, max	512 / 512
General Purpose Registers (words)	50000
General Purpose Internal Coils (bits)	32768 (16384 retentive)

ETHERNET/INTERNET
LAN Ports	2
Factory Protocols	Ethernet IP (Server & HMI), Modbus TCP (Client/Server), BACnet IP (Server), EGD
IIoT & Remote Access	MQTT Sparkplug, Horner OC360 Cloud Service, WebMI via HTML5, EnvisionRV
Other Protocols	SMTP(Client), NTP (Client), FTP (Server)
*MQTT Sparkplug & WebMI require a one-time upgrade. OCS360 is an annual subscription service.

SERIAL COMMUNICATIONS
Total Active Ports	3
Serial Ports	1 RS-232 & 1 RS-485 on first Modular Jack (MJ1/2); 1 RS-232 or 1 RS-485 on second Modular Jack (MJ3)
PLC / Drive Protocols	Yes
RTU / Modbus Master / Slave	Yes
Serial ASCII In / Out	Yes
USB C	(PD Capable Port Required for USB-C Power) USB 2.0 (480MHz) Programming & Data
USB A (1000mA max)	Access, & Device Power

NETWORKING
Integrated CAN Networks	2
Maximum CAN Distance	500m per segment, 4 segments maximum
CAN Port (Independently Isolated)	Remote I/O, Peer-to-peer Comms, Cscape
Supported CAN Protocols	CsCAN, CANopen, DeviceNet, J1939
Ethernet Productivity	Two 10/100 Mbps (Auto-MDX)
Ethernet Protocols	TCP/IP, Modbus TCP, FTP, SMTP, EGD, ICMP, ASCII
Remote I/O	SmartRail, SmartStix, SmartBlock, SmartMod, OCS-I/O

PHYSICAL SPECIFICATIONS
Height	6.5" / 166.2 mm
Width	10.4" / 263.9 mm
Depth	2.2" / 55.8 mm
I/O Module Depth	COM option adds 1.08" / 27.40 mm

OPERATING SPECS & STANDARDS
Operating Temperature	-10 to 60°C
Storage Temperature	-20°C to +60°C
Humidity (non-condensing)	5 to 95%
Product Certifications/Approvals	CE

Documentation & Resources

Document	Reference Number	Link to Download	Link to Download

SALES LITERATURE
Prime Series Accordion	HA-374

DRAWINGS	2D Electrical	2D Mechanical	3D Mechanical
XL10W Prime Model 0
XL10W Prime Model 2
XL10W Prime Model 3
XL10W Prime Model 4
XL10W Prime Model 5
XL10W Prime Model 6

TECHNICAL DOCUMENTATION
User Manual	MAN1509	Download
Quick Reference Guide	MAN1508	Download
Model 0 Datasheet	MAN1510	Download
Model 2 Datasheet	MAN1511	Download
Model 3 Datasheet	MAN1512	Download
Model 4 Datasheet	MAN1513	Download
Model 5 Datasheet	MAN1514	Download
Model 6 Datasheet	MAN1515	Download

SUPPLEMENTAL
App Guide for Updating Firmware	MAN1362	Download
App Guide for Adding Custom Splash Screen	MAN0990
Firmware Restore Manual	MAN1141
Ethernet Supplement Manual	SUP0740	Download
Thermistor Supplement	SUP0797
Cutout Template Sheet	SUP1551

Certifications

Certification Type	Download Certificate
BABAA - Build America, Buy America Act
CE Declaration of Conformity
ISO 9001: 2015

Firmware Review Notes

PRODUCT	VERSION	RELEASE DATE	TYPE	DETAILS	REQUIREMENTS
Prime X5, XL4, XL6, XLW, XL7, XL10, XL10W, XL15	17.40	March 18, 2026	Enhancement	Added WebMI 2.0 support Note – Requires Cscape 10.2 SP1 onwards
Prime X5, XL4, XL6, XLW, XL7, XL10, XL10W, XL15	17.40	March 18, 2026	Enhancement	Added support for ASCII username and password Note – Requires Cscape 10.2 SP1 onwards
Prime X5, XL4, XL6, XLW, XL7, XL10, XL10W, XL15	17.40	March 18, 2026	Enhancement	Implemented new retentive timer and counter blocks that retain accumulator values after a power cycle Note – • Applicable to Enhanced IEC only • Requires Cscape 10.2 SP1 onwards
Prime X5, XL4, XL6, XLW, XL7, XL10, XL10W, XL15	17.40	March 18, 2026	Enhancement	Added support to HSC840 and NTC800 OCS-I/O modules Note – Requires Cscape 10.2 SP1 onwards
Prime X5, XL4, XL6, XLW, XL7, XL10, XL10W, XL15	17.40	March 18, 2026	Enhancement	Added “Use as Default Gateway” option Note – Requires Cscape 10.2 SP1 onwards
Prime X5, XL4, XL6, XLW, XL7, XL10, XL10W, XL15	17.40	March 18, 2026	Bug Fix	Resolved issue wherein email stopped working when used Secomea Email Relay on port 25 without authentication
Prime X5, XL4, XL6, XLW, XL7, XL10, XL10W, XL15	17.40	March 18, 2026	Bug Fix	Resolved issue where the device displayed an exception when the program was configured with a Modbus Master block and array of structures was enabled Note – Applicable to IEC and Enhanced IEC blocks
Prime X5, XL4, XL6, XLW, XL7, XL10, XL10W, XL15	17.40	March 18, 2026	Bug Fix	Resolved issue where the ASCII TCP/IP Server protocol did not function when configured with registers beyond %R10000
Prime X5, XL4, XL6, XLW, XL7, XL10, XL10W, XL15	17.40	March 18, 2026	Bug Fix	Resolved issue where Ethernet status TX/RX bits were not shown as active when MQTT and OCS360 were enabled
Prime X5, XL4, XL6, XLW, XL7, XL10, XL10W, XL15	17.40	March 18, 2026	Bug Fix	Resolved issue where a .PGM file placed inside a folder was not loading
Prime X5, XL4, XL6, XLW, XL7, XL10, XL10W, XL15	17.40	March 18, 2026	Bug Fix	Resolved issue where GE SNP protocol was not working over RS-485 full duplex communication Note – • Requires SNP dll v5.02 onwards • Requires Cscape 10.2 SP1 onwards
Prime X5, XL4, XL6, XLW, XL7, XL10, XL10W, XL15	17.40	March 18, 2026	Bug Fix	Resolved issue wherein the device displayed system exception when devices with dual ports were configured with downloadable protocols having large scan list entries for two or more ports
Prime X5, XL4, XL6, XLW, XL7, XL10, XL10W, XL15	17.40	March 18, 2026	Bug Fix	Resolved issue where the LAN configuration status read a value of zero when configured with registers beyond %R8193
Prime X5, XL4, XL6, XLW, XL7, XL10, XL10W, XL15	17.40	March 18, 2026	Bug Fix	Resolved issue where negative Y-axis values were not plotted correctly in trend graphs
Prime X5, XL4, XL6, XLW, XL7, XL10, XL10W, XL15	17.40	March 18, 2026	Bug Fix	Resolved issue that caused the device to enter Idle mode after downloading a CANOpen Blocks program with the “Array of Structures” option enabled
Prime X5, XL4, XL6, XLW, XL7, XL10, XL10W, XL15	17.30	October 2025	Enhancement	Added “OCSIO Base Identification” feature, including the capability to trigger it from the System Menu. Note : Requires Cscape 10.2 onwards	Requires Cscape 10.2 onward
Prime X5, XL4, XL6, XLW, XL7, XL10, XL10W, XL15	17.30	October 2025	Enhancement	Added OCS360 System Menu Pages
Prime X5, XL4, XL6, XLW, XL7, XL10, XL10W, XL15	17.30	October 2025	Enhancement	Enhancements were made in the boot-up message by displaying the boot-up messages in a single screen.
Prime X5, XL4, XL6, XLW, XL7, XL10, XL10W, XL15	17.30	October 2025	Enhancement	Security Improvement Ethernet ports are open only if they are configured in Cscape and downloaded to the device.
Prime X5, XL4, XL6, XLW, XL7, XL10, XL10W, XL15	17.30	October 2025	Enhancement	Added logging of “return” state alarms, wherein if the alarm was acknowledged, but still in the alarm state, after the alarm returns to normal, the return was not being logged.
Prime X5, XL4, XL6, XLW, XL7, XL10, XL10W, XL15	17.30	October 2025	Enhancement	Added system register bit for restore operation from logic: %SR164.16 – Restore operation
Prime X5, XL4, XL6, XLW, XL7, XL10, XL10W, XL15	17.30	October 2025	Bug Fix	Resolved - After publishing for a few minutes to OCS360, the device went into Idle mode and showed a logic error in the diagnostics.
Prime X5, XL4, XL6, XLW, XL7, XL10, XL10W, XL15	17.30	October 2025	Bug Fix	Resolved - Loading a .pgm file did not match the exact model of the OCS and was not displaying an error message on the device.
Prime X5, XL4, XL6, XLW, XL7, XL10, XL10W, XL15	17.30	October 2025	Bug Fix	Resolved - Playing certain video files having non-standard resolution resulted in the shifting of the video towards the right of the video object.
Prime X5, XL4, XL6, XLW, XL7, XL10, XL10W, XL15	17.30	October 2025	Bug Fix	Resolved - LAN2 data was spilling onto LAN1 data registers when using EtherNet/IP on both LAN1 and LAN2.
Prime X5, XL4, XL6, XLW, XL7, XL10, XL10W, XL15	17.30	October 2025	Bug Fix	Resolved - Email sending using a cell modem was not working after restoring a signal, which resulted in a send failure.
Prime X5, XL4, XL6, XLW, XL7, XL10, XL10W, XL15	17.30	October 2025	Bug Fix	Resolved – The dynamically configured IP address was not editable using the System Menu in Idle mode.
Prime X5, XL4, XL6, XLW, XL7, XL10, XL10W, XL15	17.30	October 2025	Bug Fix	Resolved – The Ethernet/IP protocol stops working if the Consumed/Produced configuration exceeds 128 words.
Prime X5, XL4, XL6, XLW, XL7, XL10, XL10W, XL15	17.30	October 2025	Bug Fix	Resolved - Issues related to the overlapping of graphic objects as objects had been disappearing or becoming distorted.
Prime X5, XL4, XL6, XLW, XL7, XL10, XL10W, XL15	17.30	October 2025	Bug Fix	Enhanced IEC only Resolved - Clearing alarms from the alarm history object was giving a system exception.
Prime X5, XL4, XL6, XLW, XL7, XL10, XL10W, XL15	17.30	October 2025	Bug Fix	Resolved - Optimized the WI-FI System Menu page, wherein opening the WI-FI System Menu page was increasing the scan rate slightly.
Prime X5, XL4, XL6, XLW, XL7, XL10, XL10W, XL15	17.30	October 2025	Bug Fix	Resolved the following issues related to the CANOpen protocol: • Resolved - Set NMT block for self-node was not working in the CAN2 port for an Enhanced IEC program. • Resolved – The device was displaying a system exception when triggered “CANopen Receive Emergency Device” CANOpen block in an Enhanced IEC program. • Resolved - The device was displaying a system exception when downloading the CANOpen program while Array Of structures is enabled.  Workaround (3rd bullet only): Power cycle the device and redownload the program for an Enhanced IEC program.
Prime X5, XL4, XL6, XLW, XL7, XL10, XL10W, XL15	17.30	October 2025	Bug Fix	Resolved – The device displayed a system exception when triggered by MQTT without running a broker.
Prime X5, XL4, XL6, XLW, XL7, XL10, XL10W, XL15	17.30	October 2025	Bug Fix	Resolved – The alarm was configured with a Boolean array variable in an Enhanced IEC program. • Triggering an alarm was displaying a different alarm on the device. • Triggering an alarm was displaying an alarm message multiple times on the device.
Prime X5, XL4, XL6, XLW, XL7, XL10, XL10W, XL15	17.30	October 2025	Bug Fix	Resolved - An ASCII over TCP/IP issue in which the device status was not displayed correctly after disconnecting and reconnecting the server.
Prime X5, XL4, XL6, XLW, XL7, XL10, XL10W, XL15	17.30	October 2025	Bug Fix	Resolved - Data from the slave was not being read when there were multiple MODBUS blocks Do requests and old user blocks were used in the same program with the same port being configured in an Enhanced IEC program.
Prime X5, XL4, XL6, XLW, XL7, XL10, XL10W, XL15	17.30	October 2025	Bug Fix	Resolved – A system exception was displayed on the slave device when the array of length of holding registers and input registers of the Enhanced IEC Modbus Map slave or Modbus Map Extended slave block was changed and downloaded to the slave device; when both master and slave devices are communicating.
Prime X5, XL4, XL6, XLW, XL7, XL10, XL10W, XL15	17.30	October 2025	Bug Fix	Resolved - Analog Input values were fluctuating. Note: Applies only to Canvas 7D / Canvas 10D with Models 2, 3, and 4.
Prime X5, XL4, XL6, XLW, XL7, XL10, XL10W, XL15	17.30	October 2025	Bug Fix	Improved auto-populate feature in OCS-I/O. Note: Requires CNX116 / CNX100 firmware version 48 onwards.
Prime XL10W	17.20	May 2025	Enhancement	Added system register support to enable and disable DHCP • SR235.1 - DHCP1 (0 - Disable and 1 - Enable) • SR235.2 - DHCP2 (0 - Disable and 1 - Enable) Note: Requires Cscape 10.1 SP1 onwards.
Prime XL10W	17.20	May 2025	Enhancement	Added security enhancement for adding a device in OCS360.
Prime XL10W	17.20	May 2025	Bug Fix	Resolved: The screen capture for video streaming was not working.
Prime XL10W	17.20	May 2025	Bug Fix	Resolved: A system exception was being displayed when the power flow was enabled to the SDO Receive EMC Device Block in an Enhanced IEC program.
Prime XL10W	17.20	May 2025	Bug Fix	Resolved: The device displayed a system exception when Access Point mode was selected in Wi-Fi configuration through the System Menu and modified the Access Point mode name.
Prime XL10W	17.20	May 2025	Bug Fix	Resolved: The ASCII TCP/IP Client device status register was toggling continuously with values 45 and 0 when no server was connected.
Prime XL10W	17.10	February 2025	Enhancement	Added: OCS360 support. Note(s) • Requires Cscape version 10.1 onwards • OCS360 status information is now consistent with MQTT.
Prime XL10W	17.10	February 2025	Enhancement	Added: Support for multiple USB video streaming. Note: Requires Cscape version 10.1 onwards
Prime XL10W	17.10	February 2025	Enhancement	Added: System Register bit for System Menu access. Note: Requires Cscape version 10.1 onwards.
Prime XL10W	17.10	February 2025	Enhancement	Added Security Improvements: Ethernet ports are opened only if configured in Cscape and downloaded to the device.
Prime XL10W	17.10	February 2025	Enhancement	Added: “Set Local ID” option is supported for both CsCAN and CANOpen network types. Note: Requires Cscape version 10.1 onwards
Prime XL10W	17.10	February 2025	Enhancement	Added support to apply license through System Register and System Menu. Note: Requires Cscape version 10.1 onwards
Prime XL10W	17.10	February 2025	Bug Fix	Resolved: Bitmaps were not displayed on the device.
Prime XL10W	17.10	February 2025	Bug Fix	Resolved: The device was not sending the NMT start command to CANOpen devices after powering up.
Prime XL10W	17.10	February 2025	Bug Fix	Resolved: Forcing was not working when the unit was placed in debug mode.
Prime XL10W	17.06	November 2024	Enhancement	Added XL10W prime support.
Prime XL10W	17.06	November 2024	Enhancement	Added new blocks STRINGTOUARRAY and UARRAYTOSTRING in Enhanced IEC to support USINT data types. Note: This requires Cscape 10 SP1 onwards.
Prime XL10W	17.06	November 2024	Enhancement	The following enhancements have been added to MQTT Sparkplug: • Increased store-and-forward queue length from 256 to 1024 • Increased maximum publish topic size to 256 and 128 metrics per topic • Added Auto Reconnect enable/disable with configurable timeout • Added the ability to choose if a metric should be buffered or not in a store-and-forward situation
Prime XL10W	17.06	November 2024	Bug Fix	Resolved: Following a firmware update, the netmask changed to 0.0.0.0 instead of 255.255.255.0 Note • When the netmask is entered as 0.0.0.0 from the System Menu, it is automatically changed to 255.255.255.0. • When the user downloads a program with netmask 0.0.0.0, the device displays 255.255.255.0 after download.