The Remote Compact Controller (RCC) is a compact controller ideal for applications where a screen-less controller is the best fit
When out of stock, current lead time is up to 6 weeks.
RCC8842
On backorder - current lead times are up to 6 weeks.
Please login to see price/buy item.Log In Now
Description
- 8 digital DC inputs, 8 digital outputs, 4 Analog Inputs and 2 analog outputs, providing users with superior I/O options for a wide range of Process and Discrete Manufacturing applications
- Provides superior connectivity – supporting both CAN and 10/100 Ethernet as standard
- Inclusion of CAN provides the ability for the RCC to support hundreds of remote I/O points using Horner’s CsCAN
| RCC8842 | RCC Controller with eight (8) Digital inputs compatible with 12V/24VDC – Eight (8) DC Outputs – .5A per point – Four (4) 12-bit Analog Inputs 0-20mA and Two (2) 12-bit Analog outputs 0-20mA |
Specifications
| CONTROLLER | |
| Protocols | CsCAN, Ethernet |
| Ethernet Connector | RJ45, Auto MDIX |
| Serial Port | 2(1xRS232, 1×2-wire RS485) |
| Program Memory Size | 128 KB |
| Floating Point Support | Yes |
| AutoTune PID Capable | Yes |
| I/O | |
| Built-in I/O Points | 22 |
| Digital DC Inputs per Module | 8 |
| DC Digital Input Voltage Range | 12 VDC / 24 VDC |
| Digital DC Outputs per Module | 8 |
| Digital DC Output – Max Output Supply Voltage | 30 VDC |
| Digital DC Output – Max Inrush Current | 500mA per channel |
| Analog Input Channels | 4 (0-20 mA) |
| Analog Outputs per Module | 2 (0-20 mA) |
| Analog Inputs/Outputs, Max | 512 / 512 |
| %AQ Full Scale | 0 – 32,000 counts |
| Analog Output Response Time | One update per ladder scan |
| Analog Output Conversion Rate | All channels converted once per ladder scan |
| Digital Inputs/Outputs, Max | 2048 / 2048 |
| Built-in I/O Points | 22 |
| SmartStix, SmartRail, SmartBlock I/O Support | CsCAN & Ethernet |
| General Purpose Registers (words) | 50000 |
| General Purpose Internal Coils (bits) | 32768 (16384 retentive) |
| ETHERNET / INTERNET | |
| Ethernet Support | Standard |
| Remote Access | HTTP or EnvisionRV |
| Remote File Access | FTP or EnvisionFX |
| WebOCS Compatibility (Licensed Option) | WebMI |
| SERIAL COMMUNICATIONS | |
| Serial Ports | RS-232 & RS-485 |
| PLC/Drive Protocols | Yes |
| RTU/Modbus Master/Slave | Yes |
| Serial ASCII In/Out | Yes |
| NETWORKING | |
| Integrated CsCAN Network | Standard |
| Maximum CsCAN Distance | 1640 ft. |
| Programming over Network | Yes |
| Peer-to-Peer Messaging | Yes |
| PHYSICAL SPECIFICATIONS | |
| Weight | 10 oz. / 325.0 g |
| Housing Type | Plastic (Flame retardant, UV resistant) |
| Mounting | DIN Rail / Panel Mounting |
| Terminal Type | Spring Clamp 0.2″ / 5.08 mm, Removable |
| OPERATING SPECS & STANDARDS | |
| Operating Temperature* | -0 to 60°C |
| Storage Temperature* | -0 to 70°C |
| Humidity (non-condensing) | 5 to 95% |
| Product Certifications | UL Class 1 Div II, CE |
| Environmental Rating | IP20 |
Documentation & Resources
| Document | Reference Number | Link to Download |
|---|---|---|
| SALES LITERATURE | ||
| Sales Sheet | HA-192 |  |
| OCS Comparison Guide | HA-102 | |
| DRAWINGS | ||
| 3D Mechanical (IGS) | |
|
| 2D Mechanical (IDW / PDF) | |
|
| 3D Mechanical (STP) | |
|
| TECHNICAL DOCUMENTATION | ||
| User Manual | MAN1078 | |
| Datasheet | MAN1073 | |
| Quick Reference Guide | MAN1201 | |
| Ethernet Supplement | SUP0740 | |
| CERTIFICATIONS | ||
| UL | Certificate of Compliance | |
| Lithium Battery Test Summary | MAN1276 | |
| CE Declaration of Conformity | HA-263 | |
| ISO 9001: 2015 | Certificate of Registration | |
Firmware Review Notes
| PRODUCT | VERSION | RELEASE DATE | TYPE | DETAILS | REQUIREMENTS |
|---|---|---|---|---|---|
| RCC Series | CSCAN 15.52 | May 2021 | Enhancement | Added Ethernet Protocol Reset capabilities for FTP, EGD, Modbus and WebMI protocols – LAN1 and LAN2: %SR156.1 - EGD for LAN1 %SR156.2 - Modbus TCP Slave for LAN1 %SR156.4 - FTP for LAN1 %SR156.5 - WebMI for LAN1 and LAN2 %SR153.1 - EGD for LAN2 %SR153.2 - Modbus TCP Slave for LAN2 %SR153.4 - FTP for LAN2 User should not set other bits of %SR153 and %SR156 to one. | Bootloader |
| RCC Series | CSCAN 15.52 | May 2021 | Licensed Enhancement | Enhanced IEC Logic Programming - Enhancements over standard IEC in performance, capacity (>5x), online programming and troubleshooting. | Bootloader, Cscape 9.90 SP4 |
| RCC Series | CSCAN 15.52 | May 2021 | Licensed Enhancement | Enhanced IEC Licensing – Features added. | Bootloader, Cscape 9.90 SP4 |
| RCC Series | CSCAN 15.52 | May 2021 | Licensed Enhancement | MQTT - Expanded offline message buffering from 20 messages / broker to 1024 messages / broker. (5177) | Bootloader |
| RCC Series | CSCAN 15.52 | May 2021 | Bug Fix | Resolved an issue which could cause built-in digital inputs (%I) to turn ON during power-down (4789). | Bootloader |
| RCC Series | CSCAN 15.52 | May 2021 | Bug Fix | Units with part numbers ending in 1E2 only (i.e. HE-XC1E2). Fixed an issue where a power glitch below the operating voltage threshold could cause a relay output to latch ON (3746). | Bootloader |
| RCC Series | CSCAN 15.52 | May 2021 | Bug Fix | Resolved an issue where it was possible (but typically rare) for the unit to get stuck while booting. This situation could result in complete battery drain if left unresolved. Failure to boot within a short time will now cause the unit to re-initiate the boot, which has consistently proven to resolve the issue. | Bootloader |
| RCC Series | CSCAN 15.52 | May 2021 | Bug Fix | Fixed an issue where units were not shutting down properly when the battery voltage was below 2.0V. | Bootloader |
| RCC Series | CSCAN 15.52 | May 2021 | Bug Fix | Resolved issue where Modbus Master ladder block was not working. Port loopback test failed on MJ1, MJ2 &MJ3. (5713) | Bootloader |
| RCC Series | CSCAN 15.52 | May 2021 | Bug Fix | RCC only - Corrected an issue introduced in 15.30 which caused the legacy (pre-WebMI) webserver not to operate (3867). | Bootloader |
| RCC Series | CSCAN 15.52 | May 2021 | Bug Fix | RCC only - Fixed an issue wherein it was not possible to recover RCCs with dead batteries (4674). | Bootloader |
| RCC 2414 only | CSCAN 15.52 | May 2021 | Bug Fix | RCC2414 only - Corrected an issue wherein the RCC was not updating the LAN2 EGD status (4024). | Bootloader |
| RCC Series | CSCAN 15.52 | May 2021 | Bug Fix | Corrected an issue where the Alarm History was not being maintained after a power cycle (4206). | Bootloader |
| RCC Series | CSCAN 15.52 | May 2021 | Bug Fix | Corrected an issue where the NTP server was skipping a day after a new year (4910). | Bootloader |
| RCC Series | CSCAN 15.52 | May 2021 | Bug Fix | Fixed an intermittent watchdog issue which could occur immediately after loading a PGM file (4177). | Bootloader |
| RCC Series | Bug Fix | Download Firmware 15.52 Release Notes | |||
| RCC Series | CSCAN 15.34 | June 2020 | Bug Fix | Fixed an issue on internal I/O bus timing preventing the unit from shutting down properly and saving registers. | |
| RCC Series | CSCAN 15.34 | June 2020 | Bug Fix | Fixed an issue where a fast power cycle (less than 2 seconds) caused the unit to run on internal battery causing an improper shut down. | |
| RCC Series | CSCAN 15.34 | June 2020 | Bug Fix | Fixed a watchdog issue related to the Horner Wi-Fi module performing a mode change. | |
| RCC Series | CSCAN 15.34 | June 2020 | Bug Fix | Fixed an issue where some applications using the email feature with TLS enabled causing a watchdog reset. | |
| RCC Series | Download Firmware 15.40 Release Notes | ||||
| RCC Series | CSCAN 15.30 | October 2019 | Enhancement | BACnet protocol - Allowed configuration of parameters via registers. Added Binary Inputs, Binary Outputs, Binary Values, Analog Inputs & Analog Outputs. Added the ability to select the range of addresses to be mapped / detected in the discovery process. | |
| RCC Series | CSCAN 15.30 | October 2019 | Enhancement | Basic support for Horner HE-WIFIUSB module. Further operational improvements are scheduled for future firmware updates. Support for the HE-WIFIUSB module is NOT possible for the RCC8842, RCC972 or RCC1410. | |
| RCC Series | CSCAN 15.30 | October 2019 | Bug Fix | Possible reset when copying large files from uSD to USB | |
| RCC Series | CSCAN 15.30 | October 2019 | Bug Fix | Error using wildcards in Removable Media blocks | |
| RCC Series | CSCAN 15.30 | October 2019 | Bug Fix | Fixed issue where format size of microSD was limited to 1GB | |
| RCC Series | CSCAN 15.30 | October 2019 | Bug Fix | Alarms not displayed on web pages in WebMI | |
| RCC Series | CSCAN 15.30 | October 2019 | Bug Fix | System exception for some programs due to issue with incorrect value for baud rate for J1939 | |
| RCC Series | CSCAN 15.30 | October 2019 | Bug Fix | Fixed an issue that prevented login after download | |
| RCC Series | CSCAN 15.30 | October 2019 | Bug Fix | Date format changed to DD-Mon-YY in retentive trend playback | |
| RCC Series | CSCAN 15.30 | October 2019 | Bug Fix | Alarm object display did not show live refresh for WebMI | |
| RCC Series | CSCAN 15.30 | October 2019 | Bug Fix | Off Delay Timer output was energizing when no power was applied to Timer in first scan | |
| RCC Series | CSCAN 15.30 | October 2019 | Bug Fix | HE-X5 touch screen calibration issue where the next button can be hard to press for in-field recalibration | |
| RCC Series | CSCAN 15.30 | October 2019 | Bug Fix | When the password data object is set for user access object type, the visibility does not work as expected. | |
| RCC Series | Download Firmware 15.30 Release Notes | ||||
| RCC Series | CSCAN 15.22 | June 2019 | Enhancement | Expanded the temperature range at which battery charging can occur. The Charging Temperature Range Table below lists these ambient temperature values by controller. Refer to the Horner Rechargeable Battery Operation Manual, MAN1142, for more details. | |
| RCC Series | CSCAN 15.22 | June 2019 |  | ||
| RCC Series | Download Rechargeable Battery Operation Manual | ||||
| RCC Series | Download Firmware 15.22 Release Notes |
