Price range: $679.00 through $1,139.00
The streamlined Micro Series of embedded I/O controllers feature a built-in logic engine, operator interface, networking and I/O. Use the dropdown below to select from our two distinct model choices for each size: X4R, X7R, X10R (relay outputs) and X4A, X7A, X10A (digital outputs)
Current lead time is 2-6 weeks.
CLICK HERE FOR MORE CASE STUDIES!
The X10 controller is BABAA Compliant
MINIMAL PHYSICAL DESIGN
The small, sleek profile of the Micro Series enables you to fit more in your panel, saving space and resources. It packs a big picture into an overall small package.
COMPREHENSIVE I/O CONFIGURATION
In an effort to make implementing Horner OCS controllers as seamless and user-friendly as possible, we have selected a streamlined set of on-board I/O. The wide scope of digital and analog I/O make automating your applications, and your organization, as simple as the push of a (virtual) button. If the built-in I/O of the X4 isn’t enough for your specific application, you can easily expand via Ethernet, CAN, or serial.
FLEXIBILITY
In the market of fixed I/O, web-compatible controllers, the X4 is unmatched. Suited for most applications across a diverse range of industries, the Micro Series exceeds standards (and expectations). With powerful processor speeds, an intuitive user interface, and rugged durability, the suite of capabilities within the Micro are similar to our more established XL line of products.
COMPETITIVE ADVANTAGE
With the addition of the X4, X7, and X10 controllers, our engineers at Horner Automation have designed a slim, versatile, and complimentary product to our existing line of robust industrial solutions. When utilized as an introductory piece, our Micro Series empowers your organization to grow by seamlessly incorporating additional Horner solutions, such as our OCS-I/O or OCS360 to your expanding system.
| Built-In Inputs/Outputs | X4, X7, X10 (Model A) | X4, X7, X10 (Model R) | HE-X4R-V20 | HE-X4R-V42 |
|---|---|---|---|---|
| DC In | 12 | 12 | 12 | 12 |
| DC Out | 12 | 2 | 2 | 2 |
| Relays | n/a | 6 | 6 | 6 |
| HS In | 4 | 4 | 4 | 4 |
| HS Out | 2 | 2 | 2 | 2 |
| Analog In | 4 (4-20 mA) | 4 (4-20mA) | 2 (0-10V) 2 (4-20 mA) | 4 (0-10V) |
| RTD Support | PT-100 (-50 to 200C) | PT-100 (-50 to 200C) | PT-100 (-50 to 200C) | -- |
| Analog Out | 2 (4-20mA) | 2 (4-20mA) | 2 (4-20 mA) | 2 (0-10V) |
| Note: There are four high-speed inputs of the total DC Inputs. There are two high-speed outputs of the total DC outputs. | ||||
| Note: Model A supports sourcing outputs. Model R DC outputs are sinking with integral pull up resistors. | ||||
| SPECIAL ORDER (*) | ||||
| Part Number Extension | Description | |||
| -441 | WebMI License Unlimited pre-loaded | |||
| -443 | CANopen License is pre-loaded, CsCAN support is removed | |||
| -444 | BACnet IP/MSTP License is pre-loaded | |||
| -653 | With ABS certification | |||
| (*) Not available for purchase on the web store. Please call factory for product availability. Lead time on special order products is 4-6 weeks. | ||||
| For combinations of adder options, please contact the factory – 877.665.5666 | ||||
| CONTROLLER | X4 | X7 | X10 |
| Ladder Logic Memory | 256 kB | 256 kB | 256 kB |
| Logic Scan Rate | 0.4 mS/K | 0.4 mS/K | 0.4 mS/K |
| Removable Memory | microSD | microSD | microSD |
| Local Comment Storage | Yes | Yes | Yes |
| Floating Point Support | Yes | Yes | Yes |
| AutoTune PID Capable | Yes | Yes | Yes |
| OPERATOR INTERFACE INTERFACE | |||
| Characters / Pixels | 480 x 272 | 800 x 480 | 1024 x 600 |
| Display Technology | LCD with LED 350 nits | LCD with LED 300 nits | LCD with LED 300 nits |
| Character Height | Selectable Fonts | Selectable Fonts | Selectable Fonts |
| Number of Pages | 250 | 250 | 250 |
| Fields or Objects per Page | 100 | 100 | 100 |
| Total Keys | 5 (on screen) | 5 (on screen) | 5 (on screen) |
| Function Keys | 4 (on screen) | 4 (on screen) | 4 (on screen) |
| OEM Faceplate Available | No | No | No |
| I/O | |||
| Built-in I/O Points | 26 (model R); 30 (model A) | 26 (model R); 30 (model A) | 26 (model R); 30 (model A) |
| SmartStix, SmartRail, SmartBlock I/O Support | yes, CsCAN | yes, CsCAN | yes, CsCAN |
| Digital Inputs / Outputs, max | 1024 / 1024 | 1024 / 1024 | 1024 / 1024 |
| Analog Inputs / Outputs, max | 256 / 256 | 256 / 256 | 256 / 256 |
| General Purpose Registers (words) | 5000 retentive | 5000 retentive | 5000 retentive |
| General Purpose Internal Coils (bits) | 2,048 (1,024 retentive) | 2,048 (1,024 retentive) | 2,048 (1,024 retentive) |
| SERIAL COMMUNICATIONS | |||
| Total Active Ports | 2 | 2 | 2 |
| RS-232 Ports / RS-485 Ports | RS-232 / RS-485 (1 of each) | RS-232 / RS-485 (1 of each) | RS-232 / RS-485 (1 of each) |
| PLC / Drive Protocols | Limited | Limited | Limited |
| RTU / Modbus Master / Slave | Yes | Yes | Yes |
| Serial ASCII In / Out | Yes | Yes | Yes |
| USB Ports (A and Mini-B) | Mini-B only | Mini-B only | Mini-B only |
| ETHERNET/INTERNET | |||
| LAN Ports | 1 | 1 | 1 |
| Factory Protocols | Ethernet IP (Server & HMI), Modbus TCP (Client/Server), EGD, BACnet IP (Server-opt) | Ethernet IP (Server & HMI), Modbus TCP (Client/Server), EGD, BACnet IP (Server-opt) | Ethernet IP (Server & HMI), Modbus TCP (Client/Server), EGD, BACnet IP (Server-opt) |
| IIoT & Remote Access | Horner OC360 Cloud Service*, WebMI via HTML5*, EnvisionRV | Horner OC360 Cloud Service*, WebMI via HTML5*, EnvisionRV | Horner OC360 Cloud Service*, WebMI via HTML5*, EnvisionRV |
| Other Protocols | SMTP(Client), NTP (Client), FTP (Server) | SMTP(Client), NTP (Client), FTP (Server) | SMTP(Client), NTP (Client), FTP (Server) |
| *OCS360 is an annual subscription service; WebMI requires a one-time upgrade | |||
| NETWORKING | |||
| Integrated CAN Networks | Standard | Standard | Standard |
| Supported CAN Networks | CsCAN | CsCAN | CsCAN |
| Maximum CAN Distance | 1,640 ft. | 1,640 ft. | 1,640 ft. |
| Programming over CAN | Yes | Yes | Yes |
| PHYSICAL SPECIFICATIONS | |||
| Height | 3.53″ / 89.76 mm | 5.65″ / 143.50 mm | 6.5″ / 166.20 mm |
| Width | 4.69″ / 119.18 mm | 7.33″ / 186.08 mm | 10.4″ / 263.9 mm |
| Total Depth | 1.22″ / 31 mm | 2.08″ / 52.88 mm | 2.2″ / 55.8 mm |
| OPERATING SPECIFICATIONS & STANDARDS | |||
| Operating Temperature | -10 to 60°C | -10 to 60°C | -10 to 60°C |
| Humidity (non-condensing) | 5 to 95% | 5 to 95% | 5 to 95% |
| Voltage | 24 +/-20% VDC | 24 +/-20% VDC | 10-30 VDC |
| Product Certifications | CE, C’ | CE, C’ | CE, C’ |
| Environmental Rating | UL 50E Type 1, 4x (indoor use only), 12, 12k, 13 | UL 50E Type 1, 4x (indoor use only), 12, 12k, 13 | UL 50E Type 1, 4x (indoor use only), 12, 12k, 13 |
| SALES LITERATURE | |||
| OCS Comparison Guide | HA-294 |  | |
| OCS Selection Guide | HA-448 | | |
| Starter Kit Sales Sheet | HA-345 | | |
| TECHNICAL DOCUMENTATION | User Manual | Data Sheet | QRG |
| X4 | Download MAN1137 | Download MAN1138 | Download MAN1139 |
| X7 | Download MAN1155 | Download MAN1156 | Download MAN1157 |
| X10 | Download MAN1277 | Download MAN1278 | Download MAN1279 |
| X4 V20 | Download MAN1409 | Download MAN1424 | |
| X4 V42 | Download MAN1410 | Download MAN1425 | |
| DRAWINGS | 2D ELECTRICAL | 2D MECHANICAL | 3D MECHANICAL |
| HE-X4A, HE-X4R, HE-X4R-V20, HE-X4R-V42 | | | |
| HE-X7A, HE-X7R | | | |
| HE-X10A, HE-X10R | | | |
| SUPPLEMENTAL | |||
| App Guide for Updating Firmware | MAN1011 | Download | |
| Ethernet Supplement Manual | SUP0740 | Download | |
| Cutout Template Sheet | SUP1551 | |
| Certification Type | Download Certificate |
|---|---|
| UL | |
| CE Declaration of Conformity | |
| ISO 9001: 2015 | |
| Lithium Battery Test Summary | |
| PRODUCT | VERSION | RELEASE DATE | TYPE | DETAILS | REQUIREMENTS | |
|---|---|---|---|---|---|---|
| X4 | 16.20 | April 2026 | Enhancement | Added WebMI 2.0 support Note – Requires Cscape 10.2 SP2 onwards | ||
| X4 | 16.20 | April 2026 | Enhancement | Added support for ASCII username and password Note – Requires Cscape 10.2 SP2 onwards | ||
| X4 | 16.20 | April 2026 | Enhancement | Added support for 76800K baud rate in BACNet MSTP protocol Note – Requires BACNetIP Server dll v5.11 onwards | ||
| X4 | 16.20 | April 2026 | Enhancement | Added support to apply license through SR register and System Menu | ||
| X4 | 16.20 | April 2026 | Bug Fix | Resolved issue where the device displayed an exception when an IEC program was configured with Modbus Master block and the array of structures was enabled | ||
| X4 | 16.20 | April 2026 | Bug Fix | Resolved issue where the device would randomly restart when an IP address was configured with registers and values was set to zero | ||
| X4 | 16.20 | April 2026 | Bug Fix | Resolved issue where the slider was drifting its position when the user held the slider in one position Note – Applicable to only X4 and X10 models | ||
| X4 | 16.20 | April 2026 | Bug Fix | Resolved issue where GE SNP protocol was not working over RS-485 full duplex communication Note – • Requires SNP dll v5.02 onwards • Requires Cscape 10.2 SP2 onwards | ||
| X4 | 16.20 | April 2026 | Bug Fix | Resolved issue where negative Y-axis values were not plotted correctly in trend graphs | ||
| X4 | Download Firmware 16.20 Release Notes | |||||
| X4 | 16.10 | October 2025 | Enhancement | Added support for CPU200 (CPU series) Note: Requires Cscape 10.1 SP1 onwards | ||
| X4 | 16.10 | October 2025 | Enhancement | Added J1939 support Note(s): • This is enabled through the following extension – J2M58-12I15-92C52-38R6D-95OX5 • Requires J1939 license • Requires Cscape 10.2 onwards | ||
| X4 | 16.10 | October 2025 | Enhancement | Added “OCSIO Base Identification” feature, including the capability to trigger it from the System Menu. Note: Requires Cscape 10.2 onwards | ||
| X4 | 16.10 | October 2025 | Enhancement | Security improvements: Ethernet ports are opened only if they are configured in Cscape and downloaded to the device. | ||
| X4 | 16.10 | October 2025 | Enhancement | Added logging of “return” state alarms, wherein if the alarm was acknowledged, but still in the alarm state, after the alarm returns to normal, the return was not being logged. | ||
| X4 | 16.10 | October 2025 | Enhancement | Added System Register Bit for the restore operation from logic. Restore operation: %SR164.16 | ||
| X4 | 16.10 | October 2025 | Enhancement | Added System Register Bit for indicating the status of the CAN port Indicates a CAN port error: %SR4.14 | ||
| X4 | 16.10 | October 2025 | Bug Fix | Resolved - Loading a .pgm file did not match the exact model of the OCS, and it was not displaying any error message on the device. | ||
| X4 | 16.10 | October 2025 | Bug Fix | Resolved - Overlapping of graphic objects wherein the objects were disappearing or were becoming distorted. | ||
| X4 | 16.10 | October 2025 | Bug Fix | Resolved - Ethernet/IP protocol stopped working if the Consumed / Produced configuration exceeded 128 words. | ||
| X4 | 16.10 | October 2025 | Bug Fix | Resolved - Email stopped working when Port 25 was used without authentication, but the response from the email server was switching to TLS. Due to this resolution, if the username and password are not configured with Port 25, the firmware uses the SMTP protocol without authentication, ignoring switching to TLS. | ||
| X4 | 16.10 | October 2025 | Bug Fix | Enhanced filename (RM blocks, PGM) support from 8 characters to 47 characters support | ||
| X4 | 16.10 | October 2025 | Bug Fix | Resolved: Loading a specific PGM file displayed a “BAD Format” error on the device. | ||
| X4 | 16.10 | October 2025 | Bug Fix | Resolved the following issues related to WebMI: • FTP issue: An FTP error was being displayed while publishing webpages after a power cycle. • WebMI pages not loading: Web pages were not being loaded after signing in. | ||
| X4 | 16.10 | October 2025 | Bug Fix | Resolved: OCS-I/O configured with dynamic configuration was not working. | ||
| X4 | 16.10 | October 2025 | Bug Fix | Improved auto-populate feature in OCS-I/O. Note: Requires CNX116 / CNX100 FW Version 48 onwards. | ||
| X4 | Download Firmware 16.10 Release Notes | |||||
| X4 | 15.94 | July 2025 | Bug Fix | Resolved: Touching one part of the screen is affecting other parts of the screen. | ||
| X4 | 15.94 | Download Firmware 15.92 Release Notes | ||||
| X4 | 15.92 | May 2025 | Enhancement | “Set Local ID” option is supported for both CsCAN and CANOpen network types (Mantis #7873). Note – Requires Cscape version 10.1 onwards | ||
| X4 | 15.92 | May 2025 | Bug Fix | Resolved: Graphics objects on screen were overlapping the System Menu function keys. | ||
| X4 | 15.92 | May 2025 | Bug Fix | Security improvements were made related to the Ethernet ports. | ||
| X4 | 15.92 | May 2025 | Bug Fix | Resolved: For [some] hardware revisions, touch was not working on the left corner from top to bottom. Note: Applicable to X10 models only. | ||
| X4 | 15.92 | May 2025 | Bug Fix | Resolved: The modified baud rate was not updated in the CANOpen slave device when both master and slave devices were in an operational state. | ||
| X4 | 15.92 | May 2025 | Bug Fix | Resolved: “Delete All” functionality was not working in the Removable Media Object when the user configures the directory as “A:/” | ||
| X4 | 15.92 | May 2025 | Bug Fix | Resolved: Sometimes junk CSV files were created on the MicroSD card when Datalog and serial ports were configured. | ||
| X4 | 15.92 | May 2025 | Bug Fix | Resolved: Auto-populate issue with OCSIO. | ||
| X4 | 15.92 | Download Firmware 15.92 Release Notes | ||||
| X4 | FW 15.90 | February 2025 | Enhancement | Added support for OCSIO DQM602. | ||
| X4 | FW 15.90 | February 2025 | Enhancement | Added retain variables support for Variable-Based Advanced Ladder (VBAL). Note: Requires Cscape version 10.1 onwards. | ||
| X4 | FW 15.90 | February 2025 | Enhancement | Added System Register bit for system menu access. Note: Requires Cscape version 10.1 onwards. | ||
| X4 | FW 15.90 | February 2025 | Enhancement | Added “Alpha Filter Constant” function for analog inputs. Notes: • Requires Cscape version 10.1 onwards • Ranges from 1 – 10 (1 refers to 0.01 filtering and 10 refers to 0.1 filtering) • The lower the value, the heavier the filtering | ||
| X4 | FW 15.90 | February 2025 | Bug Fix | Resolved: The momentary button was behaving as if it was a toggle button when it was placed at the top right corner of the screen. | ||
| X4 | FW 15.90 | February 2025 | Bug Fix | Resolved: Read RM block was reading entire elements/data for an ASCII data type instead of reading only the configured number of elements. | ||
| X4 | FW 15.90 | February 2025 | Bug Fix | Resolved: Time/date object was not displaying data correctly on web pages when the user refreshed the web pages. | ||
| X4 | FW 15.90 | February 2025 | Bug Fix | Resolved: User was seeing a delay of up to 10 seconds when trying to trigger a data write operation in ASCII TCP/IP Client protocol (when the slave device was re-establishing the connection) Notes: • Provided a setting in the protocol network configuration to control the serversion reconnection interval (Fast-2 Seconds, Medium-5 Seconds, Slow-10 Seconds). • This requires ASCII TCP/IP Protocol dll v5.04 onwards. | ||
| X4 | FW 15.90 | Download Firmware 15.90 Release Notes | ||||
| PRODUCT | VERSION | RELEASE DATE | TYPE | DETAILS | REQUIREMENTS | |
|---|---|---|---|---|---|---|
| X7 | 16.20 | April 2026 | Enhancement | Added WebMI 2.0 support Note – Requires Cscape 10.2 SP2 onwards | ||
| X7 | 16.20 | April 2026 | Enhancement | Added support for ASCII username and password Note – Requires Cscape 10.2 SP2 onwards | ||
| X7 | 16.20 | April 2026 | Enhancement | Added support for 76800K baud rate in BACNet MSTP protocol Note – Requires BACNetIP Server dll v5.11 onwards | ||
| X7 | 16.20 | April 2026 | Enhancement | Added support to apply license through SR register and System Menu | ||
| X7 | 16.20 | April 2026 | Bug Fix | Resolved issue where the device displayed an exception when an IEC program was configured with Modbus Master block and the array of structures was enabled | ||
| X7 | 16.20 | April 2026 | Bug Fix | Resolved issue where the device would randomly restart when an IP address was configured with registers and values was set to zero | ||
| X7 | 16.20 | April 2026 | Bug Fix | Resolved issue where the slider was drifting its position when the user held the slider in one position Note – Applicable to only X4 and X10 models | ||
| X7 | 16.20 | April 2026 | Bug Fix | Resolved issue where GE SNP protocol was not working over RS-485 full duplex communication Note – • Requires SNP dll v5.02 onwards • Requires Cscape 10.2 SP2 onwards | ||
| X7 | 16.20 | April 2026 | Bug Fix | Resolved issue where negative Y-axis values were not plotted correctly in trend graphs | ||
| X7 | Download Firmware 16.20 Release Notes | |||||
| X7 | 16.10 | October 2025 | Enhancement | Added support for CPU200 (CPU series) Note: Requires Cscape 10.1 SP1 onwards | ||
| X7 | 16.10 | October 2025 | Enhancement | Added J1939 support Note(s): • This is enabled through the following extension – J2M58-12I15-92C52-38R6D-95OX5 • Requires J1939 license • Requires Cscape 10.2 onwards | ||
| X7 | 16.10 | October 2025 | Enhancement | Added “OCSIO Base Identification” feature, including the capability to trigger it from the System Menu. Note: Requires Cscape 10.2 onwards | ||
| X7 | 16.10 | October 2025 | Enhancement | Security improvements: Ethernet ports are opened only if they are configured in Cscape and downloaded to the device. | ||
| X7 | 16.10 | October 2025 | Enhancement | Added logging of “return” state alarms, wherein if the alarm was acknowledged, but still in the alarm state, after the alarm returns to normal, the return was not being logged. | ||
| X7 | 16.10 | October 2025 | Enhancement | Added System Register Bit for the restore operation from logic. Restore operation: %SR164.16 | ||
| X7 | 16.10 | October 2025 | Enhancement | Added System Register Bit for indicating the status of the CAN port Indicates a CAN port error: %SR4.14 | ||
| X7 | 16.10 | October 2025 | Bug Fix | Resolved - Loading a .pgm file did not match the exact model of the OCS, and it was not displaying any error message on the device. | ||
| X7 | 16.10 | October 2025 | Bug Fix | Resolved - Overlapping of graphic objects wherein the objects were disappearing or were becoming distorted. | ||
| X7 | 16.10 | October 2025 | Bug Fix | Resolved - Ethernet/IP protocol stopped working if the Consumed / Produced configuration exceeded 128 words. | ||
| X7 | 16.10 | October 2025 | Bug Fix | Resolved - Email stopped working when Port 25 was used without authentication, but the response from the email server was switching to TLS. Due to this resolution, if the username and password are not configured with Port 25, the firmware uses the SMTP protocol without authentication, ignoring switching to TLS. | ||
| X7 | 16.10 | October 2025 | Bug Fix | Enhanced filename (RM blocks, PGM) support from 8 characters to 47 characters support | ||
| X7 | 16.10 | October 2025 | Bug Fix | Resolved: Loading a specific PGM file displayed a “BAD Format” error on the device. | ||
| X7 | 16.10 | October 2025 | Bug Fix | Resolved the following issues related to WebMI: • FTP issue: An FTP error was being displayed while publishing webpages after a power cycle. • WebMI pages not loading: Web pages were not being loaded after signing in. | ||
| X7 | 16.10 | October 2025 | Bug Fix | Resolved: OCS-I/O configured with dynamic configuration was not working. | ||
| X7 | 16.10 | October 2025 | Bug Fix | Improved auto-populate feature in OCS-I/O. Note: Requires CNX116 / CNX100 FW Version 48 onwards. | ||
| X7 | 16.10 | October 2025 | Bug Fix | Resolved: The slider was drifting from its position when the user held the slider in one position | ||
| X7 | Download Firmware 16.10 Release Notes | |||||
| X7 | 15.94 | July 2025 | Bug Fix | Resolved: Touching one part of the screen is affecting other parts of the screen. | ||
| X7 | 15.94 | Download Firmware 15.92 Release Notes | ||||
| X7 | 15.92 | May 2025 | Enhancement | “Set Local ID” option is supported for both CsCAN and CANOpen network types (Mantis #7873). Note – Requires Cscape version 10.1 onwards | ||
| X7 | 15.92 | May 2025 | Bug Fix | Resolved: Graphics objects on screen were overlapping the System Menu function keys. | ||
| X7 | 15.92 | May 2025 | Bug Fix | Security improvements were made related to the Ethernet ports. | ||
| X7 | 15.92 | May 2025 | Bug Fix | Resolved: For [some] hardware revisions, touch was not working on the left corner from top to bottom. Note: Applicable to X10 models only. | ||
| X7 | 15.92 | May 2025 | Bug Fix | Resolved: The modified baud rate was not updated in the CANOpen slave device when both master and slave devices were in an operational state. | ||
| X7 | 15.92 | May 2025 | Bug Fix | Resolved: “Delete All” functionality was not working in the Removable Media Object when the user configures the directory as “A:/” | ||
| X7 | 15.92 | May 2025 | Bug Fix | Resolved: Sometimes junk CSV files were created on the MicroSD card when Datalog and serial ports were configured. | ||
| X7 | 15.92 | May 2025 | Bug Fix | Resolved: Auto-populate issue with OCSIO. | ||
| X7 | 15.92 | Download Firmware 15.92 Release Notes | ||||
| X7 | FW 15.90 | February 2025 | Enhancement | Added support for OCSIO DQM602. | ||
| X7 | FW 15.90 | February 2025 | Enhancement | Added retain variables support for Variable-Based Advanced Ladder (VBAL). Note: Requires Cscape version 10.1 onwards. | ||
| X7 | FW 15.90 | February 2025 | Enhancement | Added System Register bit for system menu access. Note: Requires Cscape version 10.1 onwards. | ||
| X7 | FW 15.90 | February 2025 | Enhancement | Added “Alpha Filter Constant” function for analog inputs. Notes: • Requires Cscape version 10.1 onwards • Ranges from 1 – 10 (1 refers to 0.01 filtering and 10 refers to 0.1 filtering) • The lower the value, the heavier the filtering | ||
| X7 | FW 15.90 | February 2025 | Bug Fix | Resolved: The momentary button was behaving as if it was a toggle button when it was placed at the top right corner of the screen. | ||
| X7 | FW 15.90 | February 2025 | Bug Fix | Resolved: Read RM block was reading entire elements/data for an ASCII data type instead of reading only the configured number of elements. | ||
| X7 | FW 15.90 | February 2025 | Bug Fix | Resolved: Time/date object was not displaying data correctly on web pages when the user refreshed the web pages. | ||
| X7 | FW 15.90 | February 2025 | Bug Fix | Resolved: User was seeing a delay of up to 10 seconds when trying to trigger a data write operation in ASCII TCP/IP Client protocol (when the slave device was re-establishing the connection) Notes: • Provided a setting in the protocol network configuration to control the serversion reconnection interval (Fast-2 Seconds, Medium-5 Seconds, Slow-10 Seconds). • This requires ASCII TCP/IP Protocol dll v5.04 onwards. | ||
| X7 | FW 15.90 | Download Firmware 15.90 Release Notes | ||||
| PRODUCT | VERSION | RELEASE DATE | TYPE | DETAILS | REQUIREMENTS | |
|---|---|---|---|---|---|---|
| X10 | 16.20 | April 2026 | Enhancement | Added WebMI 2.0 support Note – Requires Cscape 10.2 SP2 onwards | ||
| X10 | 16.20 | April 2026 | Enhancement | Added support for ASCII username and password Note – Requires Cscape 10.2 SP2 onwards | ||
| X10 | 16.20 | April 2026 | Enhancement | Added support for 76800K baud rate in BACNet MSTP protocol Note – Requires BACNetIP Server dll v5.11 onwards | ||
| X10 | 16.20 | April 2026 | Enhancement | Added support to apply license through SR register and System Menu | ||
| X10 | 16.20 | April 2026 | Bug Fix | Resolved issue where the device displayed an exception when an IEC program was configured with Modbus Master block and the array of structures was enabled | ||
| X10 | 16.20 | April 2026 | Bug Fix | Resolved issue where the device would randomly restart when an IP address was configured with registers and values was set to zero | ||
| X10 | 16.20 | April 2026 | Bug Fix | Resolved issue where the slider was drifting its position when the user held the slider in one position Note – Applicable to only X4 and X10 models | ||
| X10 | 16.20 | April 2026 | Bug Fix | Resolved issue where GE SNP protocol was not working over RS-485 full duplex communication Note – • Requires SNP dll v5.02 onwards • Requires Cscape 10.2 SP2 onwards | ||
| X10 | 16.20 | April 2026 | Bug Fix | Resolved issue where negative Y-axis values were not plotted correctly in trend graphs | ||
| X10 | Download Firmware 16.20 Release Notes | |||||
| X10 | 16.10 | October 2025 | Enhancement | Added support for CPU200 (CPU series) Note: Requires Cscape 10.1 SP1 onwards | ||
| X10 | 16.10 | October 2025 | Enhancement | Added J1939 support Note(s): • This is enabled through the following extension – J2M58-12I15-92C52-38R6D-95OX5 • Requires J1939 license • Requires Cscape 10.2 onwards | ||
| X10 | 16.10 | October 2025 | Enhancement | Added “OCSIO Base Identification” feature, including the capability to trigger it from the System Menu. Note: Requires Cscape 10.2 onwards | ||
| X10 | 16.10 | October 2025 | Enhancement | Security improvements: Ethernet ports are opened only if they are configured in Cscape and downloaded to the device. | ||
| X10 | 16.10 | October 2025 | Enhancement | Added logging of “return” state alarms, wherein if the alarm was acknowledged, but still in the alarm state, after the alarm returns to normal, the return was not being logged. | ||
| X10 | 16.10 | October 2025 | Enhancement | Added System Register Bit for the restore operation from logic. Restore operation: %SR164.16 | ||
| X10 | 16.10 | October 2025 | Enhancement | Added System Register Bit for indicating the status of the CAN port Indicates a CAN port error: %SR4.14 | ||
| X10 | 16.10 | October 2025 | Bug Fix | Resolved - Loading a .pgm file did not match the exact model of the OCS, and it was not displaying any error message on the device. | ||
| X10 | 16.10 | October 2025 | Bug Fix | Resolved - Overlapping of graphic objects wherein the objects were disappearing or were becoming distorted. | ||
| X10 | 16.10 | October 2025 | Bug Fix | Resolved - Ethernet/IP protocol stopped working if the Consumed / Produced configuration exceeded 128 words. | ||
| X10 | 16.10 | October 2025 | Bug Fix | Resolved - Email stopped working when Port 25 was used without authentication, but the response from the email server was switching to TLS. Due to this resolution, if the username and password are not configured with Port 25, the firmware uses the SMTP protocol without authentication, ignoring switching to TLS. | ||
| X10 | 16.10 | October 2025 | Bug Fix | Enhanced filename (RM blocks, PGM) support from 8 characters to 47 characters support | ||
| X10 | 16.10 | October 2025 | Bug Fix | Resolved: Loading a specific PGM file displayed a “BAD Format” error on the device. | ||
| X10 | 16.10 | October 2025 | Bug Fix | Resolved the following issues related to WebMI: • FTP issue: An FTP error was being displayed while publishing webpages after a power cycle. • WebMI pages not loading: Web pages were not being loaded after signing in. | ||
| X10 | 16.10 | October 2025 | Bug Fix | Resolved: OCS-I/O configured with dynamic configuration was not working. | ||
| X10 | 16.10 | October 2025 | Bug Fix | Improved auto-populate feature in OCS-I/O. Note: Requires CNX116 / CNX100 FW Version 48 onwards. | ||
| X10 | 16.10 | October 2025 | Bug Fix | Resolved: The slider was drifting from its position when the user held the slider in one position | ||
| X10 | Download Firmware 16.10 Release Notes | |||||
| X10 | 15.94 | July 2025 | Bug Fix | Resolved: Touching one part of the screen is affecting other parts of the screen. | ||
| X10 | 15.94 | Download Firmware 15.92 Release Notes | ||||
| X10 | 15.92 | May 2025 | Enhancement | “Set Local ID” option is supported for both CsCAN and CANOpen network types (Mantis #7873). Note – Requires Cscape version 10.1 onwards | ||
| X10 | 15.92 | May 2025 | Bug Fix | Resolved: Graphics objects on screen were overlapping the System Menu function keys. | ||
| X10 | 15.92 | May 2025 | Bug Fix | Security improvements were made related to the Ethernet ports. | ||
| X10 | 15.92 | May 2025 | Bug Fix | Resolved: For [some] hardware revisions, touch was not working on the left corner from top to bottom. Note: Applicable to X10 models only. | ||
| X10 | 15.92 | May 2025 | Bug Fix | Resolved: The modified baud rate was not updated in the CANOpen slave device when both master and slave devices were in an operational state. | ||
| X10 | 15.92 | May 2025 | Bug Fix | Resolved: “Delete All” functionality was not working in the Removable Media Object when the user configures the directory as “A:/” | ||
| X10 | 15.92 | May 2025 | Bug Fix | Resolved: Sometimes junk CSV files were created on the MicroSD card when Datalog and serial ports were configured. | ||
| X10 | 15.92 | May 2025 | Bug Fix | Resolved: Auto-populate issue with OCSIO. | ||
| X10 | 15.92 | Download Firmware 15.92 Release Notes | ||||
| X10 | FW 15.90 | February 2025 | Enhancement | Added support for OCSIO DQM602. | ||
| X10 | FW 15.90 | February 2025 | Enhancement | Added retain variables support for Variable-Based Advanced Ladder (VBAL). Note: Requires Cscape version 10.1 onwards. | ||
| X10 | FW 15.90 | February 2025 | Enhancement | Added System Register bit for system menu access. Note: Requires Cscape version 10.1 onwards. | ||
| X10 | FW 15.90 | February 2025 | Enhancement | Added “Alpha Filter Constant” function for analog inputs. Notes: • Requires Cscape version 10.1 onwards • Ranges from 1 – 10 (1 refers to 0.01 filtering and 10 refers to 0.1 filtering) • The lower the value, the heavier the filtering | ||
| X10 | FW 15.90 | February 2025 | Bug Fix | Resolved: The momentary button was behaving as if it was a toggle button when it was placed at the top right corner of the screen. | ||
| X10 | FW 15.90 | February 2025 | Bug Fix | Resolved: Read RM block was reading entire elements/data for an ASCII data type instead of reading only the configured number of elements. | ||
| X10 | FW 15.90 | February 2025 | Bug Fix | Resolved: Time/date object was not displaying data correctly on web pages when the user refreshed the web pages. | ||
| X10 | FW 15.90 | February 2025 | Bug Fix | Resolved: User was seeing a delay of up to 10 seconds when trying to trigger a data write operation in ASCII TCP/IP Client protocol (when the slave device was re-establishing the connection) Notes: • Provided a setting in the protocol network configuration to control the serversion reconnection interval (Fast-2 Seconds, Medium-5 Seconds, Slow-10 Seconds). • This requires ASCII TCP/IP Protocol dll v5.04 onwards. | ||
| X10 | FW 15.90 | Download Firmware 15.90 Release Notes | ||||
